PROGRAMME
	This is the programme for the General Assembly. Click here to see the 
	FIG Congress 2016 web site. 
	
		
			
			Monday, 02May 2016  
			Horncastle Arena (HA)  and Addington Raceway (AR) - Christchurch, 
			New Zealand | 
		 
		
			| 
			 Monday 02 May 2016 
			  
			 | 
			
			 09:00-12:30 
			13:30-16:00 
			Plenary Hall, HA  
			 | 
			
			 General Assembly, First Session 
			 | 
		 
		
			Tuesday, 
			03 May – Tursday, 05 May 2016   
			FIG 2016 Working Week and exhibition 
			Horncastle Arena  and Addington Raceway - Christchurch, New Zealand
			 
			www.fig.net/fig2016  | 
		 
		
			Tuesday 3 May  
			 
			 
			  | 
			14:00-15:30 and 16:00-17:30  
			Silk room 2, AR  
			 
			 
			  | 
			Director/Surveyor General Forum,
			 
			Chaired by Director General Peter Mersi, LINZ and Anders Sandin, 
			Lantmäteriet. | 
		 
		
			| Wednesday 4 May  | 
			12:45-13:30 
			Concourse Room, HA  
			(Bring your lunch) | 
			FIG Task Force on Commission 
			Structure – open to all FIG members to discuss the proposal 
			paper presented at the General Assembly session 1.  | 
		 
		
			Wednesday 4 May 
			  | 
			14:00-15:30  
			Silk Room 4
			 
			  | 
			Corporate Members Meeting | 
		 
		
			Wednesday 04 May  
			  | 
			17:30-18:30  
			AR  | 
			Annual Meetings of FIG Commissions | 
		 
		
			Thursday 5 May  
			 
			  | 
			
			 11:00-12:30  
			Terror of Love Lounge 2, AR  
			 
			  | 
			FIG Member Associations Forum 
			This session is reserved for Presidents or Heads of delegation (or 
			their representatives) of member associations to discuss issues of 
			their common interest. There will be a possibility to discuss the 
			proposal on Commission Structure.  By invitation only  | 
		 
		
			| Thursday 5 May  | 
			14:00-15:30 Concourse Room, HA  | 
			Academic Members Forum 
			joint with FAO | 
		 
		
			| To be announced | 
			To be announced | 
			Task Force on Scientific 
			Journal meeting | 
		 
		
			| 
			Friday, 06 May 2016 | 
		 
		
			Friday  
			06 May 
			  | 
			08:30 – 10:30 
			Concourse Room, HA  | 
			FIG Presidents’ Meeting  
			This event is convened by the FIG President and is reserved for 
			Presidents or Heads of delegation of Member Associations (or their 
			representatives) 
			By invitation only | 
		 
		
			Friday  
			06 May 
			 
			  | 
			11:00–12:30 
			13:30-15:00 
			Plenary Hall, HA  | 
			General Assembly, Second Session 
			including Closing Ceremony 
			Closing ceremony will start immediately after the conclusion of the 
			General Assembly and will be followed by the Farewell Reception 
			hosted by the hosts of FIG Working Week 2017, MIL and MAKLI, 
			Finland.
			 | 
		 
	 
	
	For the full Working Week programme check: 	
	http://www.fig.net/fig2016/program.htm  
	 
	FIG 39th GENERAL ASSEMBLY
	AGENDA
	
	for the meetings to 
	be held on  Monday 2 May 2016
	and on  Friday 6 May 
	2016 in the Plenary Hall
	at Horncastle Arena, Christchurch, New Zealand 
	  
	 
	Introduction
	This online version of the agenda includes link to all 
	appendices in .pdf. 
	IIn addition to this on-line version, the agenda and its 
	appendices will published as one large .pdf file. 
	To download only the agenda in Acrobat format 
	please click here:  
	
	 
	Agenda as uploaded on the web site 
	on 11 March 2016  (pdf, 24 pages)  
	 
	Agendaupdated per 30 April 2016 
	(pdf,  
	
	 
	Note: Revisions are shown only on the .htm version 
	of the agenda and marked with colour. 
	To download the agenda with appendices as one file in 
	Acrobat format please click here:  
	
	 
	Full Agenda incl. full bidding documents 
	as PDF (317 pages - 25 MB) updated 20 April 2016 
	
	 
	Full Agenda excl. full bidding documents (237 
	pages - 14MB) updated 20 April 2016 
	 Note: Revisions are shown only on the .htm 
	version of the agenda and marked with colour. 
	The individual appendix files can be downloaded below under 
	each item in Acrobat format. 
	PLEASE NOTE: Based on the decision from 2007 FIG 
	Office has sent members only the agenda without appendices as a hard copy. 
	Full agenda with all appendices can be downloaded from this web site. We 
	encourage you to use the online edition or otherwise to print the .pdf 
	version. 
	 
	Changes to the agenda after it was 
	originally distributed as hard copy to the member associations are marked in 
	this agenda with colour and date.  
	 
	List of Agenda Items 
	
		Monday, 02 May, 09:00-12:30 and 13:30-16:00 
	 
	
		- OPENING PROCEEDINGS
 
		- ROLL CALL
 
		- APPOINTMENT OF TELLERS
 
		- ADOPTION OF THE AGENDA
 
		- ADOPTION OF THE MINUTES OF THE 38th GENERAL ASSEMBLY
 
		- MEMBERSHIP
 
		- PRESIDENT’S REPORT 
 
		- COUNCIL RESPONSES FROM GENERAL ASSEMBLY 2015
 
		- REPORTS FROM FIG COMMISSIONS
 
		- REPORTS FROM FIG NETWORKS
 
		- REPORTS FROM THE DIRECTORS OF PERMANENT INSTITUTIONS 
		2015
 
		- REPORT OF THE PRESIDENT OF THE FIG FOUNDATION 
		2015-2016
 
		- REPORTS FROM THE FIG TASK FORCES 2015-2016
 
		- CO-OPERATION WITH THE UNITED NATIONS AND THE WORLD 
		BANK
 
		- LIAISON WITH INTERNATIONAL PROFESSIONAL ORGANISATIONS
 
		- FIG ACCOUNTS FOR 2015 AND AUDITOR’S REPORT AND BUDGETS 
		2016-2019
 
		- SUBSCRIPTION RATES FOR 2017 AND 2018
 
		- ELECTION OF TWO VICE PRESIDENTS FOR 2017-2020 - 
		PRESENTATION OF CANDIDATES
 
		- POSTPONEMENT OF ELECTION OF COMMISSION CHAIRS ELECT FOR 2017-2018
 
		- DECISION ON THE VENUE FOR 2019 FIG WORKING WEEK – 
		PRESENTATION OF CANDIDATES
Friday, 06May, 8:30-10:30 – 
		Presidents' Meeting (by invitation only)
		 
		- FIG PRESIDENTS’ MEETING
		
Friday, 06 May, 11:00–12:30 and 13:30-15:00 
		 
		- ROLL CALL
 
		- 
		MEMBERSHIP
		
 
		- ELECTION OF TWO FIG VICE PRESIDENTS FOR 2017-2020
		
 
		- REPORTS FROM COMMISSIONS, NETWORKS, PERMANENT INSTITUTIONS, FIG FOUNDATION,AND 
		OTHER WORKING WEEK ACTIVITIES (IF ANY)
		
 
		- FIG TASK FORCES
 
		
		- 
		REPORTS FROM ASSOCIATION, AFFILIATE, 
		ACADEMIC AND CORPORATE MEMBERS FORUM (IF ANY)		
 
		
		
		- DECISION ON THE VENUE FOR 2020 FIG WORKING 
		WEEK
		
 
		- OTHER ISSUES
		
 
		- REPORT ON THE WORKING WEEK 2019 IN HANOI, VIETNAM
 
		- REPORT ON THE FIG CONGRESS 2018, ISTANBUL, 
		TURKEY
		
 
		- REPORT ON THE FIG WORKING WEEK 2017, 
		HELSINKI, FINLAND 
		
 
		- PRESENTATION OF CERTIFICATES OF 
		APPRECIATION
		
 
	 CLOSING CEREMONY  
	 
	
	 
	Monday 02 May 2016
	 
	Monday, 02 May, 09:00-12:30 and 13:30-16:00  
	Conference Hall – Horncastle Arena  
	General Assembly, First Session 
	
	
	1. OPENING PROCEEDINGS
	President Chryssy Potsiou to open the 39th General Assembly.
	2. ROLL CALL
	Vice President Rudolf Staiger to take the roll call. 
	Please note: The roll call will be done for member associations 
	only. Delegates representing affiliate members, academic members, corporate 
	members and correspondents as well as honorary presidents and honorary 
	members will be entered in the records but they shall register before the 
	meeting starts at the meeting venue to the staff of FIG Office. Member 
	associations are asked to inform the FIG Office by 04 April 2016 
	about their attendance, at the same time to submit the names of their 
	delegate(s) and to inform who their Head of the delegation is, if it is not 
	the President or Chair. Please use this special link below to inform us 
	about your delegation.  
	To register:
	
	
	
	https://docs.google.com/forms/d/1cadnqGyWVECt806NSfextw42J-hK2uQ6NKvZDVkBmmU/viewform?usp=send_form 
	
	 
	Since only member associations that have paid all their membership fees 
	to the end of 2015 are allowed to vote at the meeting, a list of member 
	associations that are not allowed to vote will be published and posted on 
	the FIG web site 12 April 2016.  
	Appendix to items 2 & 22: 
	Roll Call 
	incl information of member associations that are not allowed to 
	vote at the General Assembly because of unpaid membership fees for 2015 and 
	earlier. Updated 20 April 2016 
	Motion: That members present are recorded in the minutes.  
	Decision: 
	3. APPOINTMENT OF TELLERS
	The General Assembly shall appoint two persons as tellers for the entire 
	General Assembly.  The tellers will represent the member association hosting 
	the current (NZIS), Mark Allen and the host of the proceeding following General Assembly 
	(MIL/MAKLI, Finland) xxxx.  
	Motion: That the General Assembly appoints a representative from 
	NZIS and from MIL/MAKLI as tellers for this General Assembly. 
	Decision: 
	4. ADOPTION OF THE AGENDA
	The Agenda for the General Assembly 
	was issued as mandated, two months prior the General Assembly on the FIG web 
	site and also sent to all members. 
	Motion: That the agenda be adopted. 
	Decision: 
	5. ADOPTION OF THE MINUTES OF THE 38th
	GENERAL ASSEMBLY
	Minutes have been circulated previously.  
	Appendix to item 5:
	Minutes of the General Assembly in Sofia, Bulgaria, May 
	2015, without appendices.  
	Motion: That the minutes be adopted as recorded.  
	Decision: 
	6. MEMBERSHIP
	6.1 Admittance of new Member Associations
	FIG Council has received one application for member 
	association since the 38th General Assembly. 
	6.1.1 Géographie, Topographie, Hydraulique, Energie et Construction 
	(GEOTHECO)  Uganda MA-10127 
	Géographie, Topographie, Hydraulique, Energie et Construction (GEOTHECO), 
	Uganda  has applied for association membership. The association was 
	established in 2008. Their total membership (all categories) is 42. 
	Géographie, Topographie, Hydraulique, Energie et Construction (GEOTHECO) 
	fulfills the criteria of FIG Member association.  
	Appendix to item 6.1.1: Application form 
	Motion: That the General Assembly admits Géographie, Topographie, 
	Hydraulique, Energie et Construction (GEOTHECO), Uganda to become a member 
	association of FIG.  
	Decision:  
	6.1.2 The South African Geomatics Institute, SAGI
	The South African Geomatics Institute, SAGI, 
	South Africa has applied for membership. The association was established in 
	2004. Their total membership (all categories) is 570. SAGI fulfills the 
	criteria of FIG Member association.  There is already a member association 
	from South Africa, and they have approved the application of SAGI.    
	Appendix to item 6.1.2:  
	
	Motion: That the General Assembly admits The South 
	African Geomatics Institute, SAGI, South Africa to become a member 
	association of FIG.    
	Decision:  
	6.2 Other Member Association Issues
	6.2.1 Reinstallment of Federación Argentina de Agrimensores (FADA) 
	Argentina, MA-10002 
	FADA was unfortunately expelled at the General Assembly in 2014 due to 
	lack of payment. FADA has announced that they would like to return to FIG 
	and has agreed to pay old arrears together with the 2016 membership fee. FIG 
	Council has decided to reinstall FADA and to bring this decision forward to 
	the General Assembly.  
	Motion: That the General Assembly admits to reinstall Federación 
	Argentina de Agrimensores (FADA) Argentina as member association.  
	Decision/Action:  
	6.2.2 Termination - College of Engineers and Surveyors of Puerto Rico 
	(MA-10069)   
	The College of Engineers and Surveyors of Puerto Rico (MA-10069) has 
	regrettably decided to resign from FIG. FIG Council is thankful that the 
	College of Engineers and Surveyors of Puerto Rico has cleared all arrears 
	and there are no outstanding dues. FIG thanks the association for all the 
	work they have done throughout the years they have been member FIG looks 
	forward to a time where they will find it fit to rejoin our global 
	community.  
	Motion: ThThat the General Assembly notes the resignation of the 
	College of Engineers and Surveyors of Puerto Rico.  
	Decision/Action: 
	 
	6.2.3 Termination - Termination - The Irish Institution of Surveyors, 
	(Ma-10042)  
	The Irish Institution of Surveyors has regrettably decided to resign from 
	FIG, since they have merged with RICS, UK and will be represented through 
	RICS from now on.  
	Motion: That the General Assembly notes the resignation of The Irish 
	Institution of Surveyors   
	Decision/Action: 
	 
	6.2.4 Reinstallment of National Order of 
	Cameroon Surveyors (NOCS) MA-10015   
	 FIG General Assembly had to expel 
	National Order of Cameroon Surveyors (NOCS) in 2014 due to lack of payments. 
	Now, FIG Office has received full payments from previous years and for 2016, 
	and FIG council recommends to General Assembly to reinstall the association 
	and bring this decision forward to the General Assembly.   Motion: That the 
	General Assembly reinstalls National Order of Cameroon Surveyors (NOCS) and 
	bring this decision forward to the General Assembly for endorsement.   
	Decision/Action:  
	 
	6.3 Expulsion of member associations
	Subscriptions of following member associations are more than three years 
	in arrears: 
	
		- Croatian Geodetic Society, Croatia (MA-10020)
 
		- Fiji Institute of Surveyors, Fiji (MA-10028) (are trying to pay)
 
		- Licensed Surveyors Association in Palestine, Palestina (MA-10065)
 
		- Cadastral Surveyors Association Liberia (MA-10119) 
 
	 
	The General Assembly has power to expel from the Federation any member 
	association whose fees are in arrears and shall under normal circumstances 
	expel any member association whose fees are three years in arrears. (Article 
	4.3 of the Statutes). The FIG office has sent information to these associations 
	informing that if their membership fees are still in arrears at the time of 
	the General Assembly the General Assembly shall expel the above member 
	associations in Sofia. 
	FIG Council has discussed the 
	situation for the Licenced Surveyors Association in Palestine and deem that 
	Licensed Surveyors Association in Palestine, Palestina to have suspended 
	status taking their current situation into consideration. 
	 
	The number of FIG member associations is 104 from 89 countries after 
	acceptance and before expulsions.  
	 
	Motion: That the General Assembly expels the: 
	
		- Croatian Geodetic Society, Croatia (MA-10020)
 
		- Fiji Institute of Surveyors, Fiji (MA-10028) (are trying to pay)
 
		- Licensed Surveyors Association in Palestine, Palestina (MA-10065)
 
		- Cadastral Surveyors Association Liberia (MA-10119) 
 
	 
	If no payment has been received before the General Assembly takes place.
	 
	And that 
	Licensed Surveyors Association in Palestine, Palestina (MA-10065) will be 
	registered under suspension status for the year 2016. 
	Decision/Action:  
	6.3 Suspended status 2016 
	In accordance with its administrative measures, FIG Council, has deferred 
	to continue for 2016 the issuance of a membership subscription invoice to 
	the Order of Syrian Engineers and Architects, OSEA as all efforts to 
	maintain contact with them has not yielded results, will deem their 
	membership in suspension giving due consideration to its internal situation. 
	As reported in the General Assembly 2015, there remain existing sanctions on 
	Iran, but this might change during 2016. The FIG office in Denmark cannot 
	for the time being receive payments from Iranian Professional Society of 
	Surveying Engineers (ISS). Ukrainian Society of Geodesy and Cartography has 
	also gained suspended status and has not been invoiced for 2016. Again in 
	accordance with its administrative measures, FIG Council deem their 
	membership to be in suspension. The situation with these associations will 
	be reconsidered by Council again in 2017.  
	Motion: That the General Assembly notes the members with 
	suspension status. 
	Decision:  
	6.5 Other membership issues 
	6.5.1 Affiliate members  
	The Council has admitted the following national agencies to become 
	affiliate members:    
	
		- Survey and Land Registration Bureau, Kingdom of Bahrain (AF-20056)
		
 
		- Cadastral Agency of Bulgaria, Bulgaria (AF-20058)
 
		- The State Land Service of Latvia (AF-20057) 
 
		-  LINZ – Land Information New Zealand (AF-20059) 
 
		- National Mapping and Resource Information 
		Authority, NAMIRA, Philippines (AF-20060)
 
		- State corporation Government for Citicens- Astana Kazakhstan 
		(AF-20061)  
 
		- Reinstallment: Dubai Municipality (AF-20032) – has returned as 
		member of FIG and paid all arrears. 
 
	 
	The council has expelled the following affiliate members because of 
	unpaid membership subscriptions: 
	
		- ANZLIC, Australia (AF-20001)
 
		-  National Land Centre in the  Ministry of Natural Resources, 
		Rwanda (AF-20016)
 
		- Alcaldía Mayor de Bogotá D.C., Colombia (AF-20046)
 
	 
	After these changes the number of Affiliate members is 49 from 46 
	countries. 
  
	6.5.2 Corporate members  
	
		- ISQ Portugal (CM-30051, Category F) has resigned 
 
		- COWI, Denmark ((CM 30011) has changed their membership to Category 
		D.
 
		- New member: CM-30060 Beijing Spatial 
		Corporation
 
		- New member: CM-30061 GeoReference, Engineering Consultants Saudi 
		Arabia    
 
	 
	After these changes the number of corporate members is now 24.  
	6.4.3 Academic members  
	FIG Council has admitted the following University to become Academic 
	member:  
	
		-  Ghent University Belgium (AC-40141)
 
		- University West, Department of Engineering, Sweden (AC-40142) 
 
		- Papua New Guinea University of Technology (AC-40143) 
 
		- Polytechnic of Namibia, Department of Land and Property Sciences 
		(AC-40144)   
 
	 
	The Council has expelled following universities because of unpaid 
	membership subscriptions:   
	
		-  University of Botswana (AC-40010) 
 
		- University of Mines and Technology, Ghana (AC-40030)
 
		- Universiti Teknologi Malaysia, Malaysia (AC-40041) 
 
		- Agricultural University of Cracow, Poland (AC-40054)
 
		- University of Puerto Rico, Mayagüez Campus, Puerto Rico  (AC-40055)
		
 
		- Kingston University School of Surveying, United Kingdom (AC-40073)
		
 
		- University of Prishtina Department of Geodesy, Kosovo (AC-40116)  
 
	 
	The number of Academic Members after these changes is 90 from 554 
	countries.  
	6.4.4 Correspondents  
	The number of correspondents is unchanged from 2015, and amounts to one 
	from Tonga.  
	Motion: That the General Assembly notes the actions that the 
	Council has taken with other membership matters. 
	Decision: 
	7. PRESIDENT’S REPORT 
	PPresident Chryssy Potsiou has prepared the President’s report on the 
	activities of the Federation since the General Assembly in Sofia, Bulgaria 
	in May 2015
	 Appendix to item 7:  
	
		- 
		President’s report (to be posted)
 
	 
	Motion: That the General Assembly accepts the President’s report.
	 
	Decision: 
	8. COUNCIL RESPONSES FROM GENERAL ASSEMBLY 2015
	Minutes from FIG Member Association Forum 2015 were presented at the 
	second General Assembly in Sofia, 21 May 2015. The following proposals were 
	presented to the FIG Council.  
	
		- Global Surveyors Day 
 
		1.1. Establishment of a Global Surveyors Day, and that there will be a 
		GA decision in New Zealand. 1.2. Celebrations to be dedicated to a 
		Surveyor of the Year and a topic from the broad field of surveying 
		activities. Address to history group to suggest topics, and surveyors 
		who may support the organisation of the events.  
		-  Improvements in the established relations between the member 
		states 
 
		2.1. Short information for every member association on FIG web site 		 
		2.2. Link from FIG web site to the national web site  
		2.3. Template information in all FIG languages  
		-  Changes and improvements in the management of FIG 
 
		3.1. Visibility of the benefits of FIG Membership for the membership of 
		national association  
		33.2. FIG should provide support for countries with little experience in 
		certain survey practices. Professional support and guidelines are needed 
		for the developing countries and countries in crisis 
	 
	FIG Council promised to get back to the General Assembly 2016 with a 
	follow up and status on these issues.  
	Appendix to item 8:
	Minutes from the FIG Member 
	Association Forum 2015  
	Motion: That FIG General Assembly notes the update and records its 
	thanks to the participants of the Member Association Forum 2015 for their 
	active role in FIG and constructive proposals.  
	Decision/Action:  
	9. REPORTS FROM FIG COMMISSIONS
	Each Commission Chair has submitted a written report on their Commission 
	activities since the FIG Working Week in Sofia. These reports include 
	progress reports of the Commission working groups. Each Commission will hold 
	a meeting during the Working Week (Wednesday 4 May, 17:30-18:30). Each 
	Commission will give a short report on Commission activities to the General 
	Assembly.  
	Appendices to item 9: Commission reports: 
	
	Motion: That the General Assembly adopts the reports of the 
	Commission Chairs and records its thanks to the chairs and other officers of 
	the Commissions for their ongoing contributions.  
	Decision:  
	10.2 International Institution for the History of Surveying and 
	Measurement, Permanent Institution of FIG  
	Mr. Jan de Graeve, Director of the IIHSM has prepared a report on the 
	IIHSM activities since the General Assembly in Kuala Lumpur. IIHSM will make 
	a short report to the General Assembly.  
	Appendix to item 10.2:
	Report from the International Institution for the History of Surveying and 
	Measurement, Permanent Institution of FIG.  
	Motion: That the General Assembly adopts the report and records 
	its thanks to the Director and the members of the permanent institution for 
	their past year’s work and contribution.  
	Decision:  
	10. REPORTS FROM FIG NETWORKS
	Each Network Chair has submitted a written report on their Network 
	activities since the FIG Working Week in Sofia. Each Network will give a 
	short report on the Network activities to the General Assembly. 
	Appendix to item 10: 
	
	Motion:: That the General Assembly adopts the report and records 
	its thanks to the Chairs and the members of the networks for 
	their ongoing contributions.  
	Decision: 
	11. REPORTS FROM THE DIRECTORS OF PERMANENT 
	INSTITUTIONS 2015-2016
	11.1. International Office of Cadastre and Land Records (Office 
	International du Cadastre et du Régime Foncier) OICRF 
	Dr. Christiaan Lemmen, Director of OICRF has prepared a report on the 
	OICRF activities since the General Assembly in Kuala Lumpur. He will make a 
	short report to the General Assembly.  
	Appendix to item 11.1: Report 
	from the International Office of Cadastre and Land Records (Office 
	International du Cadastre et du Régime Foncier) OICRF 
	Motion: That the General Assembly adopts the 
	report and records its thanks to the members of OICRF for their past year’s 
	work and contribution.  
	Decision: 
	11.2. International Institution for the History of Surveying and 
	Measurement, Permanent Institution of FIG 
	Mr. Jan de Graeve, Director of the IIHSM has prepared a report on the 
	IIHSM activities since the General Assembly in Kuala Lumpur. IIHSM will make 
	a short report to the General Assembly.  
	Appendix to item 11.2:
	Report from the International 
	Institution for the History of Surveying and Measurement, Permanent 
	Institution of FIG 
	Motion: That the General Assembly adopts the report and 
	records its thanks to the Director and the members of the permanent 
	institution for their past year’s work and contribution.  
	Decision:  
	12. REPORT OF THE PRESIDENT OF THE FIG FOUNDATION 
	2015-2016 
	Mr. John Hohol, President of the FIG Foundation has prepared a report on 
	the FIG Foundation activities from June 2014 to March 2016. He will make a 
	short report to the General Assembly.  
	 Appendix to item 12:
	 
	Motion:That the General Assembly adopts the 
	report of the President of the FIG Foundation and records its thanks to the 
	President and members of the Board of Directors of the FIG Foundation for 
	their past year’s work. 
	Decision:  
	13. REPORTS FROM THE FIG TASK FORCES (2015-2016) 
	FIG has currently four Task Forces.  
	13.1. Task Force on Real Property Markets 
	The Task Force assesses the progress of establishing the real property 
	markets in the countries with economies in transition. The Task Force is 
	chaired by Pekka Halme, Finnish Association of Geodetic and Land Surveyors 
	MIL. A session on Real Property Markets is included in the technical 
	programme.  
	Appendix to item 13.1 –
	Status Report from the Task 
	Force    
	Motion: That the General Assembly adopts the report from the Task 
	Force and records its thanks to the Chair of the Task Forces and their 
	members.  
	Decision:  
	13.2. Task Force on Corporate Members   
	The Task Force is established to strengthen the FIG relationship with 
	corporate members. The Task Force is chaired by John Hohol, National Society 
	of Professional Surveyors (NSPS) in cooperation with Bryn Fosburgh, Vice 
	President of Trimble.    
	Appendix to item 13.2 – 
	Status Report from the Task 
	Force (added 
	20-04-2016) 
	Motion: That the General Assembly adopts the report from 
	the Task Force and records its thanks to the Chair of the Task Forces and 
	their members.    
	Decision:  
	13.3. Task Force on Scientific Journal   
	The Task Force is established to investigate the usefulness and need and 
	if justified, the steps forward in order to introduce an FIG peer review 
	Journal (electronic or printed). The Task Force is chaired by Yerach 
	Doytsher, Association of Licensed Surveyors in Israel (ALSI). Council 
	expects a final proposal to be presented and adopted the General Assembly 
	2017. A session is included in the technical programme at the WW2016 where 
	the FIG Scientific Journal will be discussed and FIG members are encouraged 
	to participate in this session.    
	Appendix to item 13.3 – 
	Status Report from the Task 
	Force   added 30 April 2016 
	Motion: That the General Assembly adopts the report from 
	the Task Force, notes the proposed session and time line and records its 
	thanks to the Chair of the Task Forces and their members. 
	Decision:    
	13.4. Task Force on Commission Structure   
	The Task Force assesses the Commissions and investigates if there is a 
	need to revise their structure and to provide a proposal on possible 
	improvements. The Task Force is chaired by Mikael Lilje, Swedish 
	professionals for the built environment, Samhällsbyggarna. 
	At the General Assembly under this agenda item there will be a 
	possibility for discussion of the proposal. 
	During the conference days of the Working Week Members of FIG will 
	furthermore have a possibility to discuss the proposal in more details with 
	the Task Force at: 
	
		- Lunch meeting on Wednesday 4 May (grab your lunch 
		bag and attend at Concourse Room, HA)
 
		- The Member Association Forum on Thursday 5 May 
		11:00-12:30   
 
	 
	A summary of the comments received during the first General Assembly 
	session and these meetings will be presented at the 2nd General Assembly 
	session together with a proposal on how to take the Task Force forward. In 
	the case that there is a general acceptance of the proposal to make any 
	changes, the Task Force will be asked to finalise their proposal by December 
	2016 so that it can be included for voting at the 1st General Assembly 
	session in 2017 in Helsinki. If there is agreement on the proposal without 
	any changes, it can be brought forward to a vote already in the second 
	General Assembly 2016. If the general view is against the proposal Council 
	will note this, and will have to decide after the General Assembly whether 
	to close the Task Force or to let the Task Force work on a new proposal 
	based on the comments from the General Assembly if there are clear 
	indications on how the members see a new structure for the commission work.
	 
	 Appendix to item 13.4 –
	Report/Proposal from 
	the Task Force    
	Motion: That the General Assembly: 
	
		- records the report/proposal from the Task Force and records its 
		thanks to the Chair of the Task Forces and their members
 
		- records the organised meetings and possibilities for discussions
 
		- records the proposed working and time schedule for the Task Force  
		
 
	 
	Decision:  
	14. CO-OPERATION WITH THE UNITED NATIONS AND THE WORLD 
	BANK 
	Since the 38th General Assembly, FIG has continued to collaborate with 
	the World Bank and various agencies and structures within the United 
	Nations.  
	Appendix to item 14.1:
	Terms of Reference for the Network on Regional Capacity Development. 
	Motion: That the General Assembly adopts the report on the 
	co-operation between FIG and the United Nations, its agencies and the World 
	Bank and records its thanks to all those who have contributed to this 
	co-operation.  
	Decision:  
	 
	15. 11.  LIAISON WITH INTERNATIONAL PROFESSIONAL 
	ORGANISATIONS 
	TThe Joint Board of Spatial Information Societies JB-GIS was formally 
	established during the FIG Working Week in Cairo in 2005 and meets annually 
	during a major conference. The meeting of JB-GIS in 2015 was held in August 
	2015. FIG has collaborative MoUs with a number of the organizations who are 
	part of JB-GIS.  
	FIG has further bilateral agreements of co-operation with several other 
	international associations like ISM, IFHP, CIB, ION, ICEC, FIABCI, IFHS, 
	PAIGH and PAQS. 
	FIG is represented in International Construction Measurement Standard 
	Coalition by Chair of FIG Commission 10, See Lian Ong who has been appointed 
	chair of the Standard Setting Committee. FIG is represented in the Trustee 
	Board by the President. 
	FIG is represented in International Land Measurement Standard Coalition 
	by Mr. Maurice Barbieri. 
	IG Council has furthermore decided to join the Ethics Standard Committee. 
	FIG is a member of the International Council for Science (ICSU) and 
	working together with ISO and International Valuation Standards Committee 
	(IVSC) on standards.   
	Motion: That the General Assembly records the report on the 
	liaison with other international associations.  
	Decision: 
	16. FIG ACCOUNTS FOR 2015, AUDITOR'S REPORT AND BUDGETS 
	2016-2019
	VVice President Rudolf Staiger will present the report to the General 
	Assembly. This report includes the auditors report from 2015, official 
	accounts (income statement 2015) and balance sheet 31 December 2015, a 
	summary of 2015 accounts, an updated budget for 2016 and proposals for 
	budgets 2017-2019 and proposal for membership fees for member associations 
	in 2018.  
	 
	Appendix to item 16:
	Report on Financial Issues (including 2015 accounts and budgets 
	2016-2019) 
	Annexes: 
	
	Motion: That the General Assembly  
	
		- adopts the audited accounts for 2015, 
 
		- adopts the Finance Report, and
 
		- adopts budgets for 2016–2019
 
	 
	Decision: 
	17. SUBSCRIPTION RATES FOR 2017 AND 2018
	The General Assembly has to set levels of fees for member associations 
	two years in advance of the year in which they become payable. Fees are 
	payable in respect of each individual member up to a maximum of 5,500 
	members. The membership fee structure was changed in 2009. Membership fees 
	have been discussed as part of the finance report, appendix to item 16.
	 
	TThe 2015 General Assembly approved membership fees for 2017 as follows 
	under the condition that Council would re-consider at the end of 2016 
	whether it would be responsible too keep the fee stable.  
	
	
		
			|   | 
			Per capita fee | 
			Minimum fee | 
			Maximum fee | 
		 
		
			| 2017 | 
			€ 4.48 per member 
			up to a maximum of 5,500 members 
			Member associations from countries listed by the World Bank as 
			low-income economies or lower-middle-income economies shall pay
			€ 2.24 member up to a maximum of 5,500 members. | 
			20 members or € 50 
			(whichever is greater) | 
			5,500 members (€ 24,640) | 
		 
	 
	The World Bank lists of the low-income economies and the 
	lower-middle-income economies are available at:
	
	http://data.worldbank.org/about/country-classifications/country-and-lending-groups 
	 
	 
	The 2017 subscription fees were kept at the same level as for the years 
	2012-2015. 
	Although the budget 2017 shows a deficit and 2018 only a small surplus, 
	Council is also conscious of the economic condition that members are 
	operating under and in particular member’s challenges with their national 
	membership and budgets.  Council wishes to respect this as well and both 
	Council and FIG Office will continue to be prudent in its financial 
	management. Council therefore proposes after reconsidering that the level of 
	subscription for member associations for 2017 and also for 2018 to remain at 
	the same level as in the previous years.  Council has initiated a Task Force 
	to work on how to attract corporate members and the hope is to increase the 
	fees received by corporate members to limit the deficit or turn it into a 
	positive result. The current Memorandum of Understanding with Chinese 
	Society for Surveying, Mapping and Geoinformation, CSSMG on Internships to 
	the FIG office is another way to provide support to FIG.   
	Motion: That the General Assembly adopts following membership fees 
	payable by member associations in 2017 and 2018: 
	
		
			|   | 
			Per capita fee | 
			Minimum fee | 
			Maximum fee | 
		 
		
			| 2017 and 2018 | 
			€4.48 per member 
			up to a maximum of 5,500 members 
			Member associations from countries listed by the World Bank as 
			low-income economies or lower-middle-income economies shall pay
			€2.24 member up to a maximum of 5,500 members. | 
			20 members or €50 
			(whichever is greater) | 
			5,500 members (€24,640) | 
		 
	 
	  
	Decision: 
	
	18. ELECTION OF TWO VICE PRESIDENTS FOR 2017-2020 
	– PRESENTATION OF CANDIDATES  
	FIG Council has received four proposals for the two open posts of FIG 
	Vice President:  
	
		- Yerach Doytsher, Association of Licensed Surveyors in Israel 
 
		- Orhan Ercan, Chamber of Surveying and Cadastre Engineers of Turkey
		
 
		- Sunil Lalloo, Institute of Surveyors of Trinidad and Tobago 
 
		- Mikael Lilje, Swedish professionals for the built environment   
 
	 
	The profile templates of each candidate are attached to this agenda. In 
	the first session of the General Assembly each candidate will be given equal 
	time (not more than 5 minutes) to introduce her/him and make a presentation 
	focussing on his/her ideas and goals for developing the FIG agenda to the 
	General Assembly. 
	The elections will take place at the second session of the General 
	Assembly by blind votes on Friday 06 May. The elections will take place one 
	position at a time. If there will be no absolute majority in the first 
	voting, second vote will be organised between those two candidates that have 
	most votes.    
	Appendix to item 18 and 24: Profiles of the candidates: 
	
	Motion: That the General Assembly notes the 
	presentations of the candidates, makes its careful consideration at the 
	elections during the second session of the General Assembly on the 06 May.   
	 
	Decision: 
	 
	19. POSTPONEMENT OF ELECTION OF COMMISSION CHAIRS ELECT 
	FOR 2017-2018  
	The General Assembly will normally elect a Chair Elect for each of the 
	ten FIG Commissions for term of office 1.1.2017-31.12.2018. Under normal 
	circumstances the elected Chair Elect will be elected as the Chair of the 
	Commission at the FIG Congress 2018 for the period 2019-2022. 
	The General Assembly in 2015 appointed a Task Force to evaluate the 
	current Commission structure and consider if any changes are needed. The 
	recommendations of the Task Force on the Commission Structure and the 
	decision of the General Assembly may or may not affect the number of 
	commissions. Based on this on-going work, respectfully FIG Council has 
	decided to postpone the election of Chair Elect for the 10 Commissions until 
	the new structure has been settled or the current structure confirmed by the 
	General Assembly. Voting for the period 2019 to 2022, for either structure 
	scenario will take place in 2018 at the latest.    
	Motion: That the General Assembly:  
	
		-  notes the decision by FIG Council 
 
		-  adopts the proposed time frame 
 
	 
	Decision:  
	20. DECISION OF THE VENUE FOR FIG 
	WORKING WEEK 2020 – PRESENTATION OF CANDIDATES 
	The FIG Working Weeks are organised by FIG together with a local member 
	association. FIG will together with the local member association have full 
	responsibility of the arrangements and of the financial result. This offers 
	FIG better opportunities in terms of organising events and generating 
	revenue. Therefore the Council has to ensure that all candidates are aware 
	of the role of FIG and split of responsibilities for organising the Working 
	Week. This General Assembly will decide on the host for the 2020 Working 
	Week.  
	The FIG Council has received two bids to host the FIG Working Week 2020, 
	and FIG Council thanks all bidding member associations for their special 
	engagement and contribution to FIG.  
	The Council has prepared a desktop summary on the bids and has also 
	carried out an evaluation together with the FIG Office that will be 
	presented at the General Assembly. In the summary report the following 
	considerations, as laid out in the invitation documentation, are described 
	for comparison:  
	
	
		- Rotation of the conferences (region); 
 
		- Country (hosting of earlier FIG events, experience); 
 
		- Member association (its activeness, commitment to FIG and the 
		Working Week, execution ability for local association); 
 
		- Supporting organisations (local support to the Working Week, 
		governmental support, financial support, general support); 
 
		- Host city (characteristics and interest from congress programme 
		point of view, host city attractiveness, host city offerings); 
 
		- Venue (price/affordability, location of venue, internet availability 
		suitability of rooms, size of venue, structure and layout of the venue, 
		catering, value for money, hotels nearby facilities for exhibition);
		
 
		- Accessibility (flight connections, several access possibilities, 
		security, visa issues, air fare to destination); 
 
		- Safety and security (political stability, airport safety, city 
		safety, political stability in the country - rating must be 3 or 
		higher); 
 
		- Proposed dates (must meet FIG requirements, Following FIG statutes, 
		practical dates, availability of venue, other conferences at the same 
		time)
 
		- Technical programme (coverage of all FIG Commissions, potential 
		partners, originality, special ideas); 
 
		- Technical tours (coverage of all FIG Commissions, originality, ideas 
		proposed); 
 
		- Social programme (attractiveness and variety, proposals for dinners, 
		attractiveness of offered dinners, proposals for tours, is the programme 
		following the overall FIG concept); 
 
		- Attendance (expectation of international, regional and local 
		attendance, realistic number of international and national 
		participants); 
 
		- Finances (estimate of surplus and financial risks, realistic fees 
		proposed, fees in an acceptable price range, difference between 
		international and national fees, realistic budget, estimated revenue);
		
 
		- Sponsorship (estimate sponsorship and exhibition income, proposed 
		income, how realistic is proposed income, local sponsor offerings, 
		sponsor interest to conference); 
 
		- Why host (reason for hosting);
 
		- Objectives and outcomes (thought through why conference should be 
		held at destination, difference to other destinations, short term 
		outcome, long term outcome);
 
		- Suggested theme (thought of possible theme that fits to 
		local/regional situation);
 
		- Events organised in the past three years (how experienced is the 
		host in organising events)
 
		- Major events planned in the proposed city (many events might 
		affect the price level):
 
		- Initiatives for sustainable conference environment (is host city, 
		venue and local host paying attention to environmental issues);
 
		- New initiatives or activities (originality – but within the overall 
		FIG concept)
 
		- What legacy to leave locally from the Working Week (with host, 
		hosting city, for the surveying community) 
 
	 
	
	The summary report will not give a recommendation or a preference to any 
	candidate but it will provide useful information on each items listed above 
	and summarise the pros and cons of each candidate to assist the member 
	association in making their decision. General Assembly must note that, 
	especially in these past years, the issue of security and financial 
	viability has come to the fore. The purpose of the evaluation process is to 
	maintain the continued viability, high standard and quality of the FIG 
	Working Week.  
	The Council has considered the bids and has decided to present the 
	submitted bids to the General Assembly for its decision:  
	
		Amsterdam, Netherlands, Geo-Information Netherlands 
		Interlaken, Switzerland, geosuisse 
	The General Assembly is recommended to read the summaries and the bids 
	carefully.  
	Appendix to item 20 and 28:  
	Summary Reports on the Bids for FIG 2020 Working Week -
	added 20 April 2016 
	Bidding documents for FIG Working Week
	2020:  
		
			- Amsterdam, Netherlands, Geo-Information Netherlands 
 
			- Interlaken, Switzerland, geosuisse 
  
		 
	At the session each candidate will be given the same time (not more than 
	10 minutes) to make a presentation of their proposal and framework of the 
	Working Week and their bid. FIG Council will present its evaluation and the 
	impact on FIG on the various bids.  
	Decision on the venue of FIG 2020 Working Week will be made at the second 
	session of the General Assembly on 06 May. The voting will be made by blind 
	votes.  
	Motion: That the General Assembly notes the submission, the 
	summary report, the presentations and FIG’s evaluation of the candidates, 
	makes its careful consideration and decision during the second session of 
	the General Assembly on 06 May. 
	Decision:  
	 
	Friday 06 May 2016
	 
	Friday, 06 May, 08:30-10:30 
	Concourse Room, Horncastle Arena, Christchurch, New Zealand 
	Presidents’ Meeting (by invitation only)
	
	21. FIG PRESIDENT'S MEETING 
	Separate invitation to Presidents of the Member 
	Associations.  
	 
	Friday, 06 May, 11:00–12:30 and 13:30-15:00 
	Hall 3, 7th floor,  
	National Palace of Culture - Congress Centre Sofia 
	General Assembly, Second Session and Closing Ceremony
	
	22. ROLL CALL
	
	Vice President Staiger to take the roll call. 
	Please note:  
	The roll call will be done for member associations only. Delegates 
	representing affiliate members, academic members, corporate members and 
	correspondents as well as honorary presidents and honorary members will be 
	entered in the records but they shall register before the meeting starts at 
	the meeting venue to the staff of FIG Office. 
		Since only member associations that have paid all their membership 
		fees to the end of 2015 are allowed to vote at the meeting, a list of 
		member associations that are not allowed to vote will be published and 
		posted on the FIG web site 12 April 2016.  
		To be noted that the General Assembly has appointed two 
		representatives as tellers.  
	Appendix to items 2 & 22:
	Roll Call  
	incl. information on member 
	associations that are not allowed to vote at the General Assembly 
	because of unpaid membership fees for 2015 and earlier -
	updated 20 April 2016 
	Motion: Those members present are recorded in the minutes.  
	Decision:  
	23.  MEMBERSHIP
	The Council will decide on other membership issues, if 
	any, considered in Christchurch and bring them for the General Assembly for 
	decision or information as necessary.   
	
	Motion: That the General Assembly decides on 
	the membership issues based on the proposal of the Council.  
	 
	Decision:  
	24. ELECTION OF TWO FIG VICE PRESIDENTS FOR 2017-2020 
	This General Assembly will elect two Vice Presidents for the term of 
	office 1.1.2017-31.12.2020. The election will take place between:  
		
			-  Yerach Doytsher, Association of Licensed Surveyors in 
			Israel 
 
			-  Orhan Ercan, Chamber of Surveying and Cadastre Engineers 
			of Turkey 
 
			-  Sunil Lalloo, Institute of Surveyors of Trinidad and 
			Tobago
 
			-  Mikael Lilje, Swedish professionals for the built 
			environment   
 
		 
	The elections will take place by blind votes following the FIG statutes 
	and internal rules. The elections will take place one position at a time. If 
	there will be no absolute majority in the first voting, second vote will be 
	organised between those two candidates that have most votes. 
	Motion: This General Assembly elects two Vice 
	Presidents for the term  2017-2020.   
	Decision: 
	25. REPORTS FROM COMMISSIONS, NETWORKS, PERMANENT 
	INSTITUTIONS, FIG FOUNDATION AND OTHER WORKING WEEK ACTIVITIES (IF ANY) 
	Commission Officers (ACCO), Commissions, Networks, Permanent 
	Institutions, FIG Foundation and others will have their annual and other 
	administrative meetings and technical sessions in Christchurch. They may 
	report back to the General Assembly on any issues that may need the 
	endorsement of or are of general interest to the General Assembly. Any other 
	activities from the Working Week may be reported back to the General 
	Assembly on any issues that may need the endorsement of or are of general 
	interest to the General Assembly.  
	Motion: That the General Assembly records the report(s).  
	Decision: 
	26. FIG TASK FORCES 
	The four Task Forces will have meetings during the Working Week. The Task 
	Force Chairs may report back to the General Assembly on issues that may need 
	the endorsement of or are of general interest to the General Assembly.  
	26.1. Real Property Markets   
	Motion: That the General Assembly records the report.    
	Decision:    
	26.2. FIG Corporate Members   
	Motion: That the General Assembly records the report.    
	Decision:  
	26.3. Scientific Journal   
	Motion: That the General Assembly:  
	
		-  records the report 
 
		-  endorses results from the meeting 
 
		-  endorses suggested time schedules and action items for the 
		future work of the Task Forces   
 
	 
	Decision:      
	26.4. Commission Structure   
	Motion: That the General Assembly:  
	
		- records the report
 
		- endorses results from the meetings 
 
		- votes on the proposal if possible 
 
		- endorses suggested time schedules and action items for the future 
		work of the Task Forces   
 
	 
	Decision:  
	27. REPORTS FROM ASSOCIATION, AFFILIATE, ACADEMIC AND 
	CORPORATE MEMBERS FORUM (IF ANY) 
	During the Working Week there will be Member Association Forum, the 
	Director General’s/Affiliate Members Forum, Academic Members Forum and 
	Corporate Members Meeting. They may report back to the General Assembly on 
	any issues that may need the endorsement of or are of general interest to 
	the General Assembly.  
	Motion: That the General Assembly records the report(s).  
	Decision:  
	28. DECISION ON THE VENUE FOR 2020 FIG WORKING WEEK
	
	Candidates for FIG 2020 Working Week have made their presentations in the 
	first session of the General Assembly and FIG Council has presented its 
	evaluation. The decision will be made between:  
	
		- Amsterdam, Netherlands, Geo-Information Netherlands 
 
		- Interlaken, Switzerland, geosuisse   
 
	 
	The decision will take place by blind votes following the FIG statutes 
	and internal rules.  
	Motion: This General Assembly decides the host and venue for FIG 
	2020 Working Week.  
	Decision:  
	29. OTHER ISSUES
	
	Any other issues that the members want to raise for discussion.  
	Motion: That the discussion will be recorded and the Council will 
	consider action that will be required.  
	Decision:  
	30. REPORT ON THE FIG WORKING WEEK 
	2019 IN HANOI, VIETNAM
	Representatives from the Local Organising Committee from the Vietnam 
	Association of Geodesy - Cartography - Remote Sensing will give a 
	presentation on preparations of FIG Working Week 2019.  
	Motion: That the General Assembly records the report.  
	Decision: 
	31. REPORT ON THE FIG CONGRESS 2018 IN ISTANBUL, TURKEY  
	Co-congress director Orhan Ercan from the Chamber of Surveying Cadastre 
	Engineers of Turkey will give a presentation on the preparations of FIG 
	Congress 2018.  
	Motion: That the General Assembly records the report.  
	Decision: 
	32. REPORT ON THE FIG WORKING WEEK 2017 IN HELSINKI, 
	FINLAND   
	Co-conference director Pekka Halme and representatives from the Local 
	Organising Committee from the Finnish Associations MIL and MAKLI will give a 
	presentation on preparations of FIG Working Week 2017.  
	Motion: That the General Assembly records the report.  
	Decision: 
	33. PRESENTATION OF CERTIFICATES OF APPRECIATION
	CLOSING CEREMONY
	 
	Data supplied by the FIG Office.   
	
	 
	 
	Whilst every effort has been made to ensure that this data 
	is accurate errors might exist. Requests for updates and corrections should 
	be emailed to the FIG Office. 
   |