PROGRAMME
	This is the programme for the General Assembly. Click here to see the 
	FIG Congress 2015 web site. 
	
		
			
			Sunday, 17 May 2015 
			National Palace of Culture – Congress Centre Sofia (CCS) - Sofia, 
			Bulgaria | 
		 
		
			| 
			 Sunday 
			17 May 2014 
			  
			 | 
			
			 09:00-12:30 
			13:30-16:00 
			Hall 3, 7th floor 
			 | 
			
			 General Assembly, First Session 
			 | 
		 
		
			
			Monday, 18 May – Wednesday, 20 May 2015 
			FIG 2015 Working Week and exhibition 
			National Palace of Culture – Congress Centre Sofia - Sofia, Bulgaria 
			www.fig.net/fig2015    | 
		 
		
			Monday-Tuesday  
			18-19 May 
			  | 
			To be announced later (See programme 
			for individual rooms) | 
			Annual Meetings of FIG Commissions 
			and Networks | 
		 
		
			Tbc 
			 
			  | 
			To be announced later,  
			CCS, Sofia 
			  | 
			FIG Member Associations Forum 
			These two sessions are reserved for Presidents or Heads of 
			delegation (or their representatives) of member associations to 
			discuss issue of their common interest. President of Chamber of 
			Surveyors, Bulgaria chairs the meeting. 
			By invitation only | 
		 
		
			Wednesday  
			20 May  
			 
			 
			  | 
			11:00-12:30 and 13:30-15:00 
			Congress Center Sofia 
			 
			 
			  | 
			Director/Surveyor General Forum | 
		 
		
			| Tbc | 
			Congress Center Sofia | 
			Academic Members Forum | 
		 
		
			Tbc 
			  | 
			Congress Center Sofia 
			 
			  | 
			Corporate Members Forum | 
		 
		
			
			Thursday, 21 May 2015 
			Congress Center Sofia, Bulgaria | 
		 
		
			Thursday  
			21 May 
			  | 
			Presidents’ Meeting 
			08:30 – 10:30 
			Tbc | 
			FIG Presidents’ Meeting  
			This event is convened by the FIG President and is reserved for 
			Presidents or Heads of delegation of Member Associations (or their 
			representatives) 
			By invitation only | 
		 
		
			Thursday  
			21 May 
			 
			  | 
			11:00–12:30 
			13:30-15:00 
			Hall 3, 7th floor 
			CCS | 
			General Assembly, Second Session 
			including Closing Ceremony 
			Closing ceremony will start immediately after the conclusion of 
			the General Assembly and will be followed by the Farewell Reception 
			hosted by the New Zealand Institution of Surveyors, host of FIG 
			Working Week 2016. | 
		 
	 
	
	FIG 38th GENERAL ASSEMBLY
	AGENDA
	
	for the meetings to 
	be held on Sunday 17 May 2015 in Hall 3 and on Thursday 21 May 
	2015 in Hall 3 at the  National Palace of Culture - Congress Centre 
	Sofia, Sofia, Bulgaria 
	  
	 
	Introduction
	This online version of the agenda includes link to all 
	appendices in .pdf. 
	In addition to this on-line version, the agenda and its 
	appendices are published as one large .pdf file. 
	To download only the agenda in Acrobat format 
	please click here:  
	
	 
	Agenda as circulated to the members 17 March 2015  (pdf, 24 pages) 
	-   
	  
	Revised agenda as Adobe Acrobat version - version including all updates - (15 May 2015) 
	Note: Revisions are shown only on the .htm version 
	of the agenda and marked with colour. 
	To download the agenda with appendices as one file in 
	Acrobat format please click here:  
	
	 
	Full Agenda incl. full bidding documents as PDF (482 pages - 24.97 MB) 
	as at the time when sent to members 17 March 2015.  
	
	 
	Full Agenda excl. full bidding documents (261pages - 6.17 MB) as at the 
	time when sent to members 17 April 2015.  
	updated version 
	(15 May 2015) 
	 Note: Revisions are shown only on the .htm 
	version of the agenda and marked with colour. 
	The individual appendix files can be downloaded below under 
	each item in Acrobat format. 
	PLEASE NOTE: Based on the decision from 2007 FIG 
	Office has sent members only the agenda without appendices as a hard copy. 
	Full agenda with all appendices can be downloaded from this web site. We 
	encourage you to use the online edition or otherwise to print the .pdf 
	version. 
	 
	Changes to the agenda after it was 
	originally distributed as hard copy to the member associations are marked in 
	this agenda with colour and date.  
	 
	List of Agenda Items 
	
		Sunday, 17 May, 09:00-12:30 and 13:30-16:00 
	 
	
		- OPENING PROCEEDINGS
 
		- ROLL CALL
 
		- APPOINTMENT OF TELLERS
 
		- ADOPTION OF THE AGENDA
 
		- ADOPTION OF THE MINUTES OF THE 37th GENERAL ASSEMBLY
 
		- MEMBERSHIP
 
		- APPOINTMENT OF HONORARY MEMBERS
 
		- PRESIDENT’S REPORT 
 
		- COUNCIL RESPONSES FROM GENERAL ASSEMBLY 2014
 
		- REPORTS FROM THE DIRECTORS OF PERMANENT INSTITUTION 
		AND STANDARDS NETWORK 2014-15
 
		- REPORT OF THE PRESIDENT OF THE FIG FOUNDATION 
		2013-2014
 
		- FIG COUNCIL WORK PLAN 2015-2018
 
		- COMMISSION WORK PLANS 2015-2018
 
		- NEW NETWORK: REGIONAL CAPACITY DEVEOPMENT NETWORK
 
		- NEW TASK FORCES 2015-2018
 
		- FIG ACCOUNTS FOR 2014 AND AUDITOR’S REPORT AND BUDGETS 
		2015-2018
 
		- SUBSCRIPTION RATES FOR 2017
 
		- CO-OPERATION WITH THE UNITED NATIONS AND THE WORLD 
		BANK
 
		- LIAISON WITH INTERNATIONAL PROFESSIONAL ORGANISATIONS
		
 
		- DECISION ON THE VENUE FOR 2019 FIG WORKING WEEK – 
		PRESENTATION BY CANDIDATES
Thursday, 21 May, 8:30-10:30 – 
		Presidents' Meeting (by invitation only)
		 
		- FIG PRESIDENTS’ MEETING
		
Thursday, 21 May, 11:00–12:30 and 13:30-15:00 
		 
		- ROLL CALL
 
		- 
		
MEMBERSHIP 
		 
		- 
		
REPORTS FROM ASSOCIATION, AFFILIATE, 
		ACADEMIC AND CORPORATE MEMBERS FORUM (IF ANY) 
		 
		- 
		
REPORTS FROM COMMISSIONS, NETWORKS, AND 
		TASK FORCES (IF ANY) 
		 
		- 
		
REPORTS FROM PERMANENT INSTITUTIONS (IF 
		ANY) 
		 
		- 
		
REPORT FROM FIG FOUNDATION (IF ANY) 
		 
		- 
		
DECISION ON THE VENUE FOR 2019 FIG WORKING 
		WEEK 
		 
		- 
		
REPORT ON THE FIG CONGRESS 2018, ISTANBUL, 
		TURKEY 
		 
		- 
		
REPORT ON THE FIG WORKING WEEK 2017, 
		HELSINKI, FINLAND 
		 
		- 
		
REPORT ON THE WORKING WEEK 2016 IN 
		CHRISTCHURCH, NEW ZEALAND 
		 
		- 
		
PRESENTATION OF CERTIFICATES OF 
		APPRECIATION 
		 
	 
	CLOSING CEREMONY  
	  
	
	 
	Sunday 17 May 2015
	 
	Sunday, 17 June, 09:00-13:00 and 14:00-17:00 
	Hall 3, National Palace of Culture 
	General Assembly, First Session
	
	
	1. OPENING PROCEEDINGS
	President Chryssy Potsiou to open the 38th General Assembly.
	2. ROLL CALL
	Vice President Rudolf Staiger to take the roll call. 
	Please note: The roll call will be done for member associations 
	and affiliate members only. Delegates representing academic members, 
	corporate members and correspondents as well as honorary presidents and 
	honorary members will be entered in the records but they shall register 
	before the meeting starts at the meeting venue to the staff of FIG Office. 
	Member associations are asked to inform the FIG Office by 12 April 2015 
	about their attendance, at the same time to submit the names of their 
	delegate(s) and to inform who their Head of the delegation is, if it is not 
	the President or Chair. Please use this special link below to inform us 
	about your delegation.  
	To register:
	
	https://docs.google.com/forms/d/1cadnqGyWVECt806NSfextw42J-hK2uQ6NKvZDVkBmmU/viewform?usp=send_form  
	 
	Since only member associations that have paid all their membership fees 
	to the end of 2014 are allowed to vote at the meeting, a list of member 
	associations that are not allowed to vote will be published and posted on 
	the FIG web site 15 April 2015.  
	Appendix to items 2 & 22: 
	Roll Call 
	 
	Appendix to items 2 & 22:
	List of member 
	associations that are not allowed to vote at the General Assembly 
	because of unpaid membership fees for 2014 and earlier -
	updated 11 May 2015 
	Motion: That members present are recorded in the minutes.  
	Decision: 
	3. APPOINTMENT OF TELLERS
	The General Assembly shall appoint two persons as tellers for the entire 
	General Assembly. The tellers will represent member association that hosted 
	the preceding (Dr. Zaid, President of PEJUTA, Malaysia) and the host of the proceeding following 
	General Assembly (Jeff Needham, President NZIS, New Zealand). 
	Motion: That the General Assembly appoints a representative from 
	PEJUTA and NZIS as tellers for this General Assembly. 
	Decision: 
	4. ADOPTION OF THE AGENDA
	The Agenda for the General Assembly was issued as mandated, on 17 March 
	2015. 
	Motion: That the agenda be adopted. 
	Decision: 
	5. ADOPTION OF THE MINUTES OF THE 37th
	GENERAL ASSEMBLY
	Minutes have been circulated previously.  
	Appendix to item 5:
	Minutes of the 
	General Assembly in Kuala Lumpur, Malaysia, June 2014, without appendices. 
	Motion: That the minutes be adopted as recorded.  
	Decision: 
	6. MEMBERSHIP
	6.1 Member Associations
	6.1.1 New Member Associations 
	 
	There have been no new member association applications since 37th General 
	Assembly in 2014. 
	Two new applications for 
	member association have arrived and have been discussed at the Council 
	meeting who decided to bring forward the applications to the General 
	Assembly:    
	Colombian Society of 
	Surveyors,  Sociedad Colombiana de Topografos (S.C.T.)    
	The Colombian Society of Surveyors has applied for 
	membership. The association was established in 1963. Their total membership 
	(all categories) is 70. Colombian Society of Surveyors fulfills the criteria 
	of FIG Member association. Application form is attached as 
	appendix to 
	agenda item 6.1   
	Distinctive Engineering 
	Group, Rwanda     
	The Distinctive Engineering Group, Rwanda has applied 
	for membership. The association was established on 27 March 2015. Their 
	total membership is 32, and the number of qualified members is 25. 
	Distinctive Engineering Group, Rwanda fulfills the criteria of FIG member 
	association. Application form is attached as 
	appendix to agenda item 6.1  
	 
	Added 15 May 2015  
	 
	Motion: That the General Assembly notes that there has not been any 
	new member association applications. 
	Decision:  
	6.1.2 College of Engineers and Surveyors of Puerto Rico (MA-10069) 
	FIG General Assembly expelled College of Engineers and Surveyors of 
	Puerto Rico (MA-10069) at the General Assembly meeting in 2014 due to the 
	fact that the association was in arrears for 3 years. FIG office has however 
	later received the full payment from College of Engineers and Surveyors of 
	Puerto Rico. FIG Council therefore proposes to cancel the expulsion and note 
	them as reinstalled as member of FIG.  
	Motion: That the General Assembly admits to reinstall College of 
	Engineers and Surveyors of Puerto Rico (MA-10069) as member association. 
	Decision/Action:  
	6.1.3 Geodetic Engineers of the Philippines, Inc. (MA-10107)  
	At the FIG General Assembly 2014 Geodetic Engineers of the Philippines, 
	Inc. (MA-10107) was supposed to be expelled from FIG but FIG Council 
	received a letter from the association that they would pay their arrears 
	before 1 October 2014. FIG Office received the payment and FIG Council 
	informs the General Assembly that they will remain as member. 
	Motion: That FIG General Assembly notes the update of Geodetic 
	Engineers of the Philippines (MA-10107) that they remain as member of FIG. 
	Decision/Action:  
	 
	6.2 Expulsion of member associations
	Subscriptions of following member associations are more than three years 
	in arrears: 
	
		- Ordre National des Geometres du Cameroun (MA-10015)
 
		- Tunisian Association of Chartered Surveyors (MA-10086)
 
	 
	The General Assembly has power to expel from the Federation any member 
	association whose fees are in arrears and shall under normal circumstances 
	expel any member association whose fees are three years in arrears. (Article 
	4.3 of the Statutes). The FIG office has sent a letter to these associations 
	informing that if their membership fees are still in arrears at the time of 
	the General Assembly the General Assembly shall expel the above member 
	associations in Sofia. 
	 
	The number of FIG member associations is 102 from 89 countries.  
	  
	Motion: That the General Assembly expels the: 
	
		- Ordre National des Geometres du Cameroun (MA-10015)
 
		- Tunisian Association of Chartered Surveyors (MA-10086)
 
	 
	Decision/Action:  
	6.3 Suspended status 2015 
	In accordance with its administrative measures, FIG Council, has deferred 
	to continue for 2015 the issuance of a membership subscription invoice to 
	the Order of Syrian Engineers and Architects, OSEA as all efforts to 
	maintain contact with them has not yielded results, will deem their 
	membership in suspension giving due consideration to its internal situation. 
	As reported in the General Assembly 2014, there remain existing sanctions on 
	Iran. The FIG office in Denmark cannot receive payments from Iranian 
	Professional Society of Surveying Engineers (ISS). Ukrainian Society of 
	Geodesy and Cartography has also gained suspended status and has not been 
	invoiced for 2014. Again in accordance with its administrative measures, FIG 
	Council deem their membership to be in suspension. The situation with these 
	associations will be reconsidered by Council again in 2016. 
	Motion: That the General Assembly notes the members with 
	suspension status. 
	Decision:  
	6.4 Other membership issues 
	6.4.1 Affiliate members  
	The Council has admitted the following national agencies to become 
	affiliate members:  
	
		- iTaukei Land Trust Board, Fiji – AF-20051
 
		- Geospatial Information Authority of Japan/Geodetic Department – 
		AF-20052
 
		- Guatemalan Registry of Cadastral Information (Registro de 
		Información Catastral de Guatemala – RIC), AF-20053
 
		- Land Administration Authority (LAA) Lesotho – AF-20054
 
		- General Direction of Land Registry, Mapping and 
		Cadastre, Benin Added 15 May 2015 
 
	 
	The council has expelled the following affiliate members because of 
	unpaid membership subscriptions. 
	
		- National Land Centre in the Ministry of Natural Resources, Rwanda 
		(AF-20016)
 
		- Bureau of Land Management, Department of Interior, USA (AF 20037)
 
		- AIMS-Afghanistan Information Management Services, Afghanistan 
		(AF-20038)
 
	 
	After these changes the number of Affiliate members is 41 from 38 
	countries. 
	  
	6.4.2 Corporate members  
	The Council has admitted the following companies as Corporate Members of 
	FIG after the General Assembly in 2014: 
	
		- Branco Etera Ltd, Kazakhstan – CM-30055 (Category F)
 
		- NEH Engineering survey and mapping limited company, Vietnam – 
		CM-30056 (Category E)
 
		- Ripro Corporation, Japan – CM-30057 (Category D)
 
		- Datalife, Nigeria - CM- (Category F)
		added 15 May 2015
 
	 
	Following corporate members have resigned from their membership from 
	1.1.2015: 
	
		- MondoGeo (category F –regional level)
 
	 
	Following corporate members have been expelled by FIG Council: 
	
		- Cameroon Engineering S.A., Cameroon (CM-30027 )
 
		- SEPRET (Société des Etudes de Projets et Réalisation des Travaux, 
		S.A.R.L.), Morocco (CM-30031)
 
		- Global Survey Qatar, Qatar (CM-30047)
 
	 
	After these changes the number of corporate members is now 21. 
	  
	6.4.3 Academic members  
	FIG Council has admitted the following University to become Academic 
	member: 
	
		- Technical University of Civil Engineering - Faculty of Geodesy, 
		Bucharest, Romania (AC-40134)
 
		- Sabaragamuwa University of Sri Lanka, Faculty of Geomatics 
		(AC-40135)
 
		- Kwame Nkrumah University of Science and 
		Technology, Department of Geomatic Engineering, Ghana,
		added 15 May 2015 
 
	 
	The following academic members has terminated their membership: 
	
		- "TECRS" The Environmental Center of Remote Sensing Dept. of 
		Geosystem Technology, Saudi Arabia (AC-40117) 
 
	 
	The Council has expelled following universities because of unpaid 
	membership subscriptions:  
	
		- Dublin Institute of Technology, Ireland (AC-40036) (has promised to 
		pay)
 
		- Istanbul Technical University Dept. Geodesy & Photogrammetry, Turkey 
		(AC-40071) (has paid) amended 15 May 
		2015
 
		- Neapolis University, Cyprus (AC-40114) (has promised to pay)
 
		- IAV, Institut Agronomique et Vétérinaire Hassan II, Morocco 
		(AC-40118) 
 
	 
	The number of Academic Members after these changes is 89/86 from 56/53 
	countries.  
	6.4.4 Correspondents  
	Council has ended its cooperation with two of the Correspondent Members 
	since General Assembly 2014 and the number of correspondents is now 1. 
	Motion: That the General Assembly notes the actions that the 
	Council has taken with other membership matters. 
	Decision: 
	7. APPOINTMENT OF HONORARY MEMBER
	a. Christiaan Lemmen  
	Geo-Informatie Nederland GIN of the Netherlands has sent a nomination 
	letter in which it proposes that FIG appoints Christiaan Lemmen as an 
	Honorary Member of FIG.  
	FIG Council has considered the nomination and considers that it fulfils 
	the criteria (see criteria at:
	
	http://www.fig.net/pub/figpub/pub40/figpub40.htm#Criteria) for an 
	Honorary Member and therefore proposes to the General Assembly that it 
	appoints Christiaan Lemmen as an Honorary Members of the Federation for the 
	outstanding services he has provided to the Federation.  
	b. Other potential nominations  
	Other potential nominations for Honorary Member might be considered by 
	the Council.  
	FIG Appreciation to Clarissa Augustinus 
	UN-Habitat   
	FIG Appreciation to Clarissa Augustinus UN-Habitat 
	Clarissa Augustinus, UN-Habitat, has worked closely with FIG for many years 
	and is now standing down from UN-HABITAT. FIG Council would like to 
	acknowledge the longstanding cooperation with Clarissa Augustinus. As a 
	special consideration FIG Council has decided to appreciate her as Honorary 
	Ambassador. Her certificate will be presented to her which will be given to 
	her during the Plenary session 2 on 19 May where she will be one of the 
	plenary speakers. added 15 May 2015 
	 
	
	Appendix to item 7: The nomination letter from
	Geo-Informatie Nederland GIN 
	Motion: That the General Assembly appoints Christiaan Lemmen as 
	Honorary Member of FIG and appoints other potential nominations if brought 
	forward by FIG Council. That the General Assembly 
	notes the special appreciation to Clarissa Augustinus.
	added 15 May 2015 
	Decision:  
	Appointment of Honorary President
	 
	The Association of Authorised Land Surveyors Malaysia, PEJUTA has sent 
	FIG Council a proposal that it makes a nomination to the General Assembly of 
	appointing Mr CheeHai Teo, the immediate Past President of FIG as an 
	Honorary President of the Federation. The letter is attached as 
	appendix to 
	agenda item 7. FIG Concil has decided to bring forward this proposal to the 
	General Assembly, noting that CheeHai Teo fulfills the criteria for an 
	Honorary President and his achievements as the President have contributed 
	the Federation to extend that he without any doubt deserves to be appointed 
	as an FIG Honorary President.    
	Motion: That the General Assembly appoints CheeHai Teo 
	as FIG Honorary President.    
	Decision/action:    
	added 15 May 2015  
	8. PRESIDENT’S REPORT 
	President Chryssy Potsiou has prepared the President’s report on the 
	activities of the Federation since the General Assembly in Kuala Lumpur, 
	Malaysia in June 2014.  
	Appendix to item 8:  
	
	Motion: That the General Assembly accepts the President’s report.
	 
	Decision: 
	9. COUNCIL RESPONSES FROM GENERAL ASSEMBLY 2014
	At the General Assembly 2014 the following items were discussed: 
	
		- Proposal from Geosuisse, Switzerland (1: nomination body; 2: VP’s 
		nominated through regional bodies; 3: Commission Chairs Elects elected 
		by the Commissions) 
 
		- Proposal from DdL, Denmark, on change of term for the President (to 
		start immediately after election)
 
		- Surveyors day/week (Presented by John Hohol at the General Assembly 
		2014) 
 
	 
	FIG Council promised to get back to the General Assembly 2015 with a 
	follow up and status on these issues.  
	Motion: That FIG General Assembly notes the update and records its 
	thanks to the submitters of the proposals for their active role in FIG.  
	Decision/Action:  
	10. REPORTS FROM THE DIRECTORS OF PERMANENT 
	INSTITUTIONS AND STANDARDS NETWORK 2014-15
	10.1 International Office of Cadastre and Land Records (Office 
	International du Cadastre et du Régime Foncier) OICRF  
	Mr. Christiaan Lemmen, Director of OICRF has prepared a report on the 
	OICRF activities since the General Assembly in Kuala Lumpur. He will make a 
	short report to the General Assembly.  
	Appendix to item 10.1:
	Report from the International Office of Cadastre and Land Records (Office 
	International du Cadastre et du Régime Foncier) OICRF.  
	Motion: That the General Assembly adopts the report and records 
	its thanks to the members of OICRF for their past year’s work and 
	contribution.  
	Decision:  
	10.2 International Institution for the History of Surveying and 
	Measurement, Permanent Institution of FIG  
	Mr. Jan de Graeve, Director of the IIHSM has prepared a report on the 
	IIHSM activities since the General Assembly in Kuala Lumpur. IIHSM will make 
	a short report to the General Assembly.  
	Appendix to item 10.2:
	Report from the International Institution for the History of Surveying and 
	Measurement, Permanent Institution of FIG.  
	Motion: That the General Assembly adopts the report and records 
	its thanks to the Director and the members of the permanent institution for 
	their past year’s work and contribution.  
	Decision:  
	10.3 Standards Network  
	Mr David Martin, Chair of the FIG Standards Network has prepared a report 
	on the Standards Network activities since the General Assembly in Kuala 
	Lumpur. Standards Network will make a short report to the General Assembly
	 
	Appendix to item 10.3: Report from the Standards Network. To be 
	added  
	Motion: That the General Assembly adopts the report and records 
	its thanks to the Chair and the members of the permanent institution for 
	their past year’s work and contribution.  
	Decision: 
	11. REPORT OF THE PRESIDENT OF THE FIG FOUNDATION 
	2014-2015
	Mr. John Hohol, President of the FIG Foundation has prepared a report on 
	the FIG Foundation activities from June 2014 to March 2015. He will make a 
	short report to the General Assembly.  
	Appendix to item 11:  
	
	Motion: That the General Assembly adopts the report of the 
	President of the FIG Foundation and records its thanks to the President and 
	members of the Board of Directors of the FIG Foundation for their past 
	year’s work. 
	Decision: 
	12. FIG COUNCIL WORK PLAN 2015-2018
	The Council has prepared the FIG Council Work Plan for 20151-2018. 
	Together with the Commission Work Plans the Council Work Plan will form the 
	FIG Work Plan for the next four years. The proposal for the Council Work 
	Plan 2015-2018 is attached to the agenda and is based on preparations made 
	in a Council meeting and in a meeting with the Commission Chairs during the 
	Kick-Off Event in January 2015 in Athens, Greece as well as responses from 
	the Kick Off Event. The Council Work Plan has also been coordinated with the 
	Commissions', Networks', Task Forces’ and Permanent Institutions’ Work 
	Plans.  
	President Potsiou will present the Work Plan at the meeting.  
	The Council has also decided on responsibilities of individual Council 
	members. This list is included as an appendix to the Council Work Plan. An 
	up-to-date list will always be available on the FIG web site.  
	Appendix to item 12:
	FIG Council Work Plan 2015-2018  
	Motion: That the General Assembly adopts the Council Work Plan for 
	2015-2018.  
	Decision:  
	13. COMMISSION WORK PLANS 2015-2018
	Commission Chairs have prepared their Commission Work Plan for 2015-2018 
	based on discussions at their Commission meetings at the FIG Congress in 
	Kuala Lumpur. After Kuala Lumpur the Work Plans have been coordinated with 
	the Council Work Plan and with other Commission Work Plans at the meeting of 
	Commission chairs and the FIG Council in conjunction to the FIG Kick-Off 
	Meeting in January 2015 in Athens, Greece.  
	All Commission Work Plans have now been finalised and synchronised with 
	the Council Work Plan and are presented for the General Assembly for its 
	approval in Sofia in May 2015.  
	At the General Assembly time is reserved for the members to discuss the 
	Work Plans and Commission activities with the Commission Chairs. This 
	discussion will be chaired by Vice President Diane Dumashie, who will be 
	chairing ACCO (2015-2016), together with the ACCO representative Brian 
	Coutts (2015-2016). 
	Appendices to item 13:  
	
	Motion: That the General Assembly adopts the Commission Work 
	Plans.  
	Decision:  
	14. NEW NETWORK: REGIONAL CAPACITY DEVELOPMENT NETWORK
	The Council has established a new Network. This network originates from 
	the Africa Task Force 2009-2014 and will in the term 2015-18 concentrate on 
	Africa. This Network is chaired by FIG Vice President Diane Dumashie. The 
	Network will work in close co-operation with all Commissions. The Network 
	will have its first meeting in Sofia where members of the Network will be 
	appointed by the Council and brought to the General Assembly for 
	endorsement.  
	Appendix to item 14.1:
	Terms of Reference for the Network on Regional Capacity Development. 
	Motion: That the General Assembly records the Council’s decision 
	of establishment of the Regional Capacity Development Network, appointment 
	of Vice President Diane Dumashie to chair the Network and its terms of 
	reference for information.  
	Decision:  
	 
	15. NEW TASK FORCES - 2015-2018
	The Council has established four new Task Forces for 2015-2018.  
	15.1 Task Force on Real Property Markets  
	The first Task Force will assess the progress of establishing the real 
	property markets in the countries with economies in transition. The Task 
	Force will be chaired by Pekka Halme, Finnish Association of Geodetic and 
	Land Surveyors MIL. The Task Force will have its first meeting in Sofia 
	where members of the Task Force will be appointed by the Council and brought 
	to the General Assembly for endorsement.  
	Appendix to item 15.1:
	Terms of Reference for the Task Force on Real Property Markets.  
	Motion: That the General Assembly records the Council’s decision 
	of establishment of the Task Force on Real Property Markets, appointment of 
	Pekka Halme to chair the Task Force and its terms of reference for 
	information.  
	Decision:  
	15.2 Task Force on Commission Structure  
	The second Task Force will assess the Commissions and investigate if 
	there is a need to revise their structure and provide a proposal on possible 
	improvements.  
	The Task Force is originated from two proposals from FIG Member 
	Associations.  
	One proposal originating from Geosuisse that was discussed at the General 
	Assembly 2014, who proposed: 
	For Commission Chairs Elect, the right to nominate should be with the 
	Commissions themselves. They have to evaluate the candidates and to make 
	sure that she/he is able to fulfil the responsibility. The Commissions are 
	the only bodies that have sufficient knowledge of their national delegates 
	and who are able to judge their eligibility. Commissions will discuss with 
	the national association the candidate they wish to nominate.  
	The second proposal that FIG Council has received is from the following 
	member associations:  
	
		- Danish Association of Chartered Surveyors (Denmark)
 
		- Finnish Association of Geodetic and Land Surveyors MIL (Finland)
 
		- Norges Jordskiftekandidatforening, faglig gruppe av Tekna (NJKF) 
		(Norway)
 
		- Swedish professionals for the built environment
 
	 
	This proposal suggests evaluating the current Commission Structure in 
	order to secure the efficiency of the FIG Commissions. Based on the above 
	mentioned suggestions and further discussions in Council, Council has 
	decided to establish a Task Force that in general will assess and evaluate 
	the current structure of the commissions. The Task Force will be chaired by 
	Mikael Lilje, Swedish professionals for the built environment, 
	Samhällsbyggarna. The Task Force will have its first meeting in Sofia where 
	members of the Task Force will be appointed by the Council and brought to 
	the General Assembly for endorsement.  
	Appendix to item 15.2:
	Terms of Reference for the Task Force on Commission Structure 
	 
	Motion: That the General Assembly records the Council’s decision 
	of establishment of the Task Force on Commission Structure and the 
	appointment of Mikael Lilje to chair the Task Force and its terms of 
	reference for information.  
	Decision:  
	15.3 Task Force on Corporate Members  
	The third Task Force will be established to strengthen the FIG 
	relationship with corporate members. The Task Force will be chaired by John 
	Hohol, National Society of Professional Surveyors (NSPS) in cooperation with 
	Bryn Fosburgh, Vice President of Trimble. The Task Force will have its first 
	meeting in Sofia where members of the Task Force will be appointed by the 
	Council and brought to the General Assembly for endorsement.  
	Appendix to item 15.3:
	Terms of Reference for the Task Force on Corporate Members.  
	Motion: That the General Assembly records the Council’s decision 
	of establishment of the Task Force on Corporate Members, appointment of John 
	Hohol in cooperation with Bryn Fosburgh to chair the Task Force and its 
	terms of reference for information.  
	Decision:  
	15.4 Task Force on Scientific Journal  
	The fourth Task Force will be established to investigate the usefulness 
	and need and if justified, the steps forward in order to introduce an FIG 
	peer review Journal (electronic or printed). The Task Force will be chaired 
	by Yerach Doytsher, Association of Licensed Surveyors in Israel (ALSI). The 
	Task Force will have its first meeting in Sofia where members of the Task 
	Force will be appointed by the Council and brought to the General Assembly 
	for endorsement.  
	Appendix to item 15.3:
	Terms of Reference for the Task Force on Scientific Journal 
	 
	Motion: That the General Assembly records the Council’s decision 
	of establishment of the Task Force on Scientific Journal, appointment of 
	Yerach Doytsher to chair the Task Force and its terms of reference for 
	information.  
	Decision: 
	16. FIG ACCOUNTS FOR 2014, AUDITOR's REPORT AND BUDGETS 
	2015-2018
	Vice President Rudolf Staiger will present the report to the General 
	Assembly. This report includes the auditors report from 2014, official 
	accounts (income statement 2014) and balance sheet 31 December 2014, a 
	summary of 2014 accounts, an updated budget for 2015 and proposals for 
	budgets 2016-2018 with notes and proposal for membership fees for member 
	associations in 2017. 
	 
	Appendix to item 09:
	Report on Financial Issues (including 2014 accounts and budgets 
	2015-2018) 
	Annexes: 
	
	Motion: That the General Assembly  
	
		- adopts the audited accounts for 2014, 
 
		- adopts the Finance Report, and
 
		- adopts budgets for 2015–2018
 
	 
	Decision: 
	17. SUBSCRIPTION RATES FOR 2017
	The General Assembly has to set levels of fees for member associations 
	two years in advance of the year in which they become payable. Fees are 
	payable in respect of each individual member up to a maximum of 5,500 
	members. The membership fee structure was changed in 2009. Membership fees 
	have been discussed as part of the finance report, appendix to item 16.
	 
	The 2014 General Assembly approved membership fees as follows: 
	
	
		
			|   | 
			Per capita fee | 
			Minimum fee | 
			Maximum fee | 
		 
		
			| 2016 | 
			€ 4.48 per member 
			up to a maximum of 5,500 members 
			Member associations from countries listed by the World Bank as 
			low-income economies or lower-middle-income economies shall pay
			€ 2.24 member up to a maximum of 5,500 members. | 
			20 members or € 50 
			(whichever is greater) | 
			5,500 members (€ 24,640) | 
		 
	 
	The World Bank lists of the low-income economies and the 
	lower-middle-income economies are available at:
	
	http://data.worldbank.org/about/country-classifications/country-and-lending-groups 
	 
	 
	The 2016 subscription fees were kept at the same level as for the years 
	2012-2015. The Council 2011-14 had to suggest subscription fees up to 2016, 
	however they recognised that there would be a change in leadership and the 
	subscription fees is dependent on the strategies of the council 2015-18.  
	Although the budgets 2017 and 18 show a deficit, Council is also 
	conscious of the economic condition that members are operating under and in 
	particular member’s challenges with their national membership and budgets. 
	Council wishes to respect this as well and both Council and FIG Office will 
	continue to be prudent in its financial management. Council therefore 
	proposes the level of subscription for member associations for 2017 to 
	remain at the same level as in the previous years. Council has initiated a 
	Task Force on how to attract corporate members and the hope is to increase 
	the fees received by corporate members to limit the deficit or turn it into 
	a positive result. FIG Council will evaluate after a year how this work 
	develops, and if the work on corporate members does not show positive 
	effect, Council suggests reconsidering the membership fee for 2017 at the 
	General Assembly in 2016.  
	Motion: That the General Assembly adopts following membership fees 
	payable by member associations in 2017: 
	
		
			|   | 
			Per capita fee | 
			Minimum fee | 
			Maximum fee | 
		 
		
			| 2017 | 
			€4.48 per member 
			up to a maximum of 5,500 members 
			Member associations from countries listed by the World Bank as 
			low-income economies or lower-middle-income economies shall pay
			€2.24 member up to a maximum of 5,500 members. | 
			20 members or €50 
			(whichever is greater) | 
			5,500 members (€24,640) | 
		 
	 
	Decision: 
	
	18. CO-OPERATION WITH THE UNITED NATIONS AND THE WORLD 
	BANK 
	18.1 Meetings and conferences  
	The main activities in the co-operation with the United Nations and the 
	World Bank since the FIG congress in Kuala Lumpur have been:  
	
		- President Teo participated in UNESCAP, FAO and UN-Habitat 
		co-organised Regional Multi-stakeholder Consultation on Land Tenure in 
		Asia-Pacific
 
		- President Teo participated in 21st Meeting of the International 
		Steering Committee on Global Mapping, 5 August 2014, United Nations 
		Headquarters in New York
 
		- President Teo participated in Fourth Session of the United Nations 
		Committee of Experts on Global Geospatial Information Management 
		(UN-GGIM), 6 – 8 August 2014, United Nations Headquarters in New York
 
		- FIG Young Surveyors and UN-Habitat/GLTN organised a workshop on The 
		Social Tenure Domain Model – Training of Trainers, 7-10 November 2014 in 
		Addis Ababa, Ethiopia primarily for African particpants.
 
		- Vice President Pengfei Cheng and Past President Teo attended the 
		Third High Level Forum on Global Geospatial Information Management, 
		22-24 October 2014, Beijing, PR China
 
		- FIG undertook two expert group meetings in Bangkok in cooperation 
		with UN-Habitat/GLTN on Valuation of Unregistered Land and Properties 
		Expert Group Meeting, Bangkok, Thailand, 13 - 14 October 2014 and 
		Modernising Land Agencies Budgetary Approach: Costing and Financing of 
		Land Administration Services in Developing Countries, Validation 
		Workshop (CoFLAS), 15 - 16 October 2014, Bangkok, Thailand
 
		- UN-GGIM-AP - Third Plenary Meeting 10 – 12 November 2014 Kuta, Bali, 
		Republic of Indonesia, represented by FIG Past President Teo.
 
		- Ninth Meeting of the International Committee on Global Navigation 
		Satellite Systems (ICG-9), Mikael Lilje, Chair of FIG Commission 5 and 
		UNOOSA representative, 9 – 14 November 2014 Kuta, Prague, Czech Republic
		
 
	 
	FIG will be represented at the World Bank Conference March 2015 by 
	President Chryssy Potsiou. There will be a special side activity on the FIG 
	Work Plan.  
	18.2 Global Geodetic Reference Frame for Sustainable Development 
	resolution  
	At the FIG General Assembly 2014 FIG Council presented a FIG Statement on 
	Global Geodetic Reference Frame for Sustainable Development where FIG 
	expressed the importance of the resolution and urged the member 
	organizations to bring the Statement back home to the respective countries.
	 
	The Global Geodetic Reference Frame for Sustainable Development (GGRF) 
	resolution was adopted by the United Nations General Assembly on Thursday 26 
	February 2015  
	Motion: That the General Assembly adopts the report on the 
	co-operation between FIG and the United Nations, its agencies and the World 
	Bank and records its thanks to all those who have contributed to this 
	co-operation.  
	Decision: 
	 
	19. LIAISON WITH INTERNATIONAL PROFESSIONAL 
	ORGANISATIONS 
	The Joint Board of Spatial Information Societies JB-GIS was formally 
	established during the FIG Working Week in Cairo in 2005 and meets annually 
	during a major conference. The meeting of JB-GIS in 2014 was held in August 
	2014 and was attended by nine of the ten participating international 
	organization. FIG has collaborative MoUs with a number of the organizations 
	who are part of JB-GIS.  
	FIG has further bilateral agreements of co-operation with several other 
	international associations like ISM, IFHP, CIB, ION, ICEC, FIABCI, IFHS, 
	PAIGH and PAQS.  
	President CheeHai Teo attended the International Union of Notaries 
	Conference on Land Tenure Security in Asia, 12-13 December 2014, Ho-Chi-Minh 
	City, Vietnam.  
	IPMS, is mainly driven by our member association RICS, and FIG was until 
	the end of last period represented by FIG Commission 9 Chair Frances 
	Plimmer, and FIG Council thanks her for her work. FIG Council will appoint a 
	new representative to IPMS. In December 2014 there was launch of a new 
	International Property Measurement Standard (IPMS) for Office Buildings.  
	FIG is a member of the International Council for Science (ICSU) and 
	working together with ISO and International Valuation Standards Committee 
	(IVSC) on standards.  
	Motion: That the General Assembly records the report on the 
	liaison with other international associations.  
	Decision:  
	20. DECISION OF THE VENUE FOR FIG 
	WORKING WEEK 2019 – PRESENTATION OF CANDIDATES 
	The FIG Working Weeks are organised by FIG together with a local member 
	association. FIG will together with the local member association have full 
	responsibility of the arrangements and of the financial result. This offers 
	FIG better opportunities in terms of organising events and generating 
	revenue. Therefore the Council has to ensure that all candidates are aware 
	of the role of FIG and split of responsibilities for organising the Working 
	Week. This General Assembly will decide on the host for the 2019 Working 
	Week.  
	The FIG Council has received five bids to host the FIG Working Week 2019, 
	and FIG Council thanks all bidding member associations for their special 
	engagement and contribution to FIG.  
	The Council has prepared a desktop summary on the bids and has also 
	carried out an evaluation together with the FIG Office that will be 
	presented at the General Assembly. In the summary report the following 
	considerations, as laid out in the invitation documentation, are described 
	for comparison:  
	
	
		- Rotation of the conferences (region); 
 
		- Country (hosting of earlier FIG events, experience); 
 
		- Member association (its activeness, commitment to FIG and to FIG 
		2017, execution ability for local association); 
 
		- Supporting organisations (local support to the Working Week, 
		governmental support, financial support, general support); 
 
		- Host city (characteristics and interest from congress programme 
		point of view, host city attractiveness, host city offerings); 
 
		- Venue (price/affordability, location of venue, internet availability 
		suitability of rooms, size of venue, structure and layout of the venue, 
		catering, value for money, hotels nearby facilities for exhibition);
		
 
		- Accessibility (flight connections, several access possibilities, 
		security, visa issues, air fare to destination); 
 
		- Safety and security (political stability, airport safety, city 
		safety, political stability in the country - rating must be 3 or 
		higher); 
 
		- Proposed dates (must meet FIG requirements, Following FIG statutes, 
		practical dates, availability of venue, other conferences at the same 
		time)
 
		- Technical programme (coverage of all FIG Commissions, potential 
		partners, originality, special ideas); 
 
		- Technical tours (coverage of all FIG Commissions, originality, ideas 
		proposed); 
 
		- Social programme (attractiveness and variety, proposals for dinners, 
		attractiveness of offered dinners, proposals for tours, is the programme 
		following the overall FIG concept); 
 
		- Attendance (expectation of international, regional and local 
		attendance, realistic number of international and national 
		participants); 
 
		- Finances (estimate of surplus and financial risks, realistic fees 
		proposed, fees in an acceptable price range, difference between 
		international and national fees, realistic budget, estimated revenue);
		
 
		- Sponsorship (estimate sponsorship and exhibition income, proposed 
		income, how realistic is proposed income, local sponsor offerings, 
		sponsor interest to conference); 
 
		- Why host (reason for hosting);
 
		- Objectives and outcomes (thought through why conference should be 
		held at destination, difference to other destinations, short term 
		outcome, long term outcome);
 
		- Suggested theme (thought of possible theme that fits to 
		local/regional situation);
 
		- Events organised in the past three years (how experienced is the 
		host in organising events)
 
		- Major events planned in the proposed city in 2017 (many events might 
		affect the price level):
 
		- Initiatives for sustainable conference environment (is host city, 
		venue and local host paying attention to environmental issues);
 
		- New initiatives or activities (originality – but within the overall 
		FIG concept)
 
		- What legacy to leave locally from the Working Week (with host, 
		hosting city, for the surveying community) 
 
	 
	
	The summary report will not give a recommendation or a preference to any 
	candidate but it will provide useful information on each items listed above 
	and summarise the pros and cons of each candidate to assist the member 
	association in making their decision. General Assembly must note that, 
	especially in these past years, the issue of security and financial 
	viability has come to the fore. The purpose of the evaluation process is to 
	maintain the continued viability, high standard and quality of the FIG 
	Working Week.  
	The Council has considered the bids and has decided to present four of 
	the five submitted bids to the General Assembly for its decision. The 
	following four bids fulfilled the basic requirements:  
	a) Dublin, Ireland, Society of Chartered Surveyors, Ireland (RICS) 
	b) Nairobi, Kenya, Institution of Surveyors, Kenya 
	c) Geneva or Interlaken, Switzerland, geosuisse 
	d) Hanoi, Vietnam, The Vietnam Association of Geodesy, Cartography and 
	Remote Sensing (VGCR)  
	The General Assembly is recommended to read the summaries and the bids 
	carefully.  
	Appendix to item 20 and 28:  
	Summary Reports on the Bids for FIG 2019 Working Week 
	Bidding documents for FIG 2019 Working Week:  
	a) Dublin, Ireland, Society of Chartered Surveyors, Ireland (RICS) -
	Summary -
	Bidding document - 
	b) Nairobi, Kenya, Institution of Surveyors, Kenya  -
	Summary -
	Bidding document - 
	c) Geneva or Interlaken, Switzerland, geosuisse  -
	Summary -
	Bidding document - 
	d) Hanoi, Vietnam, The Vietnam Association of Geodesy, Cartography and 
	Remote Sensing (VGCR)   
	-
	Summary -
	Bidding document - 
	 
	At the session each candidate will be given the same time (not more than 
	10 minutes) to make a presentation of their proposal and framework of the 
	Working Week and their bid. FIG Council will present its evaluation and the 
	impact on FIG on the various bids.  
	Decision on the venue of FIG 2019 Working Week will be made at the second 
	session of the General Assembly on 21 May. The voting will be made by blind 
	votes. If there will be no absolute majority in the first voting for any of 
	the proposals, a second vote will be organised between those two candidates 
	that have most votes.  
	Motion: That the General Assembly notes the submission, the 
	summary report, the presentations and FIG’s evaluation of the candidates, 
	makes its careful consideration and decision during the second session of 
	the General Assembly on 21 May. 
	Decision:  
	 
	Thursday 21 May 2015
	 
	Thursday, 21 May, 08:30-10:30 
	Room to be announced,  
	National Palace of Culture - Congress Centre Sofia
	Presidents’ Meeting (by invitation only)
	
	21. FIG PRESIDENT'S MEETING 
	Separate invitation to Presidents of the Member 
	Associations.  
	 
	Thursday, 21 May, 11:00–12:30 and 13:30-15:00 
	Hall 3, 7th floor,  
	National Palace of Culture - Congress Centre Sofia 
	General Assembly, Second Session and Closing Ceremony
	
	22. ROLL CALL
	
	Vice President Staiger to take the roll call. 
	Please note:  
	The roll call will be done for member associations and affiliate members 
	only. Delegates representing academic members, corporate members and 
	correspondents as well as honorary presidents and honorary members will be 
	entered in the records but they shall register before the meeting starts at 
	the meeting venue to the staff of FIG Office. Member associations are asked 
	to inform the FIG Office by 12 April 2015 about their attendance, at the 
	same time to submit the names of their delegate(s) and to inform who their 
	Head of the delegation is, if it is not the President or Chair. Please use 
	this special link below to inform us  
	about your delegation. Since only member associations that have paid all 
	their membership fees to the end of 2014 are allowed to vote at the meeting, 
	a list of member associations that are not allowed to vote will be published 
	and posted on the FIG web site 15 April 2015.  
	To be noted that the General Assembly has appointed a representative from 
	PEJUTA, Malaysia and from NZIS, New Zealand as tellers to this session of 
	the General Assembly. 
	Appendix to items 2 & 22:
	Roll Call  
	Appendix to items 2 & 22:
	List of member 
	associations that are not allowed to vote at the General Assembly 
	because of unpaid membership fees for 2014 and earlier -
	updated 11 May 2015 
	Motion: Those members present are recorded in the minutes.  
	Decision:  
	23.  MEMBERSHIP
	The Council will decide on other membership issues considered in Kuala 
	Lumpur and bring them for the General Assembly for decision or information 
	as necessary.  
	Member Associations   
	Licensed Surveyors Association of Ghana (LISAG)   The Licensed Surveyors Association of Ghana (LISAG) has applied for 
	membership. Their number of members is 100. Licensed Surveyors Association 
	of Ghana fulfils the criteria of FIG Member association. The application has 
	been approved by the existing member association from Ghana, Ghana 
	Institution of Surveyors. Application form is attached as appendix to agenda 
	item 23.1. (to be added)   Motion: That the General Assembly decides on the membership 
	issues based on the proposal of the Council.  That the General Assembly admits the Licensed Surveyors Association of Ghana 
	(LISAG) to become member association of FIG Added 21 May 2015    
	Decision:    Other membership matters   The Council has admitted the following academic member: 
	
	The Council has admitted the following corporate member 
	
		- Innovation for Trading and Contracting 
	(Category F)
 
	 
	Motion: That the General Assembly notes the actions that 
	the Council has taken with other membership matters.   
	Decision:      
	 Added 21 May 2015 
	  
	Motion: That the General Assembly decides on 
	the membership issues based on the proposal of the Council.  
	 
	Decision:  
	24. REPORTS FROM ASSOCIATION, AFFILIATE, ACADEMIC AND 
	CORPORATE MEMBERS FORUM (IF ANY)
	During the Working Week there will be Member Association Forum, the 
	Director General’s/Affiliate Members Forum, Academic Members Forum and 
	Corporate Members Meeting. They may report back to the General Assembly on 
	any issues that may need the endorsement of or are of general interest to 
	the General Assembly.  
	Motion: That the General Assembly records the report(s)  
	Decision: 
	25. REPORTS FROM COMMISSIONS, NETWORKS AND TASK FORCES 
	(IF ANY)
	Commission Officers (ACCO), Commissions, Networks and Task forces will 
	have their annual and other administrative meetings in Sofia. They may 
	report back to the General Assembly on any issues that may need the 
	endorsement of or are of general interest to the General Assembly.  
	Motion: That the General Assembly records the report(s).  
	Decision: 
	ITEM 15.2 Task Force to assess the commission 
	structure 
	  
	It was decided at the first General Assembly on 15 May 2015 to wait with the 
	motion for agenda item 15.2, to establish a Task Force to assess the 
	commission structure, until it was discussed during the working week. 
	  
	Motion:  The GA endorses the Council’s proposal to 
	establish a task force to assess the commission structure. 
	  
	Decision: 
	  
	ITEM 15.4 Task force on Scientific Journal 
	  
	It was decided at the first General Assembly on 15 May 2015 to wait with the 
	motion for agenda item 15.4, the establishment of a Task Force on Scientific 
	Journal, until it was discussed during the working week 
	  
	Motion: The GA endorses the council’s proposal to establish 
	a task force on Scientific Journal 
	  
	Decision:  
	  Added 21 May 2015 
	26. REPORTS FROM PERMANENT INSTITUTIONS (IF ANY) 
	The permanent institutions will have various activities during the 
	congress. They may report back to the General Assembly on any matters of 
	general interest.  
	Motion: That the General Assembly records the report(s).  
	Decision: 
	27. REPORT FROM FIG FOUNDATION (IF ANY) 
	A meeting for FIG Foundation is organised in Kuala Lumpur and various 
	activities are taking place during the Congress. They may report back to the 
	General Assembly on any matters of general interest.  
	Motion: That the General Assembly records the report.  
	Decision:  
	28. DECISION ON THE VENUE FOR 2019 FIG WORKING WEEK
	
	Candidates for FIG 2019 Working Week have made their presentations in the 
	first session of the General Assembly and FIG Council has presented its 
	evaluation. The decision will be made between:  
	
		- Dublin, Ireland, Society of Chartered Surveyors, Ireland (RICS)
 
		- Nairobi, Kenya, Institution of Surveyors, Kenya
 
		- Geneva or Interlaken, Switzerland, geosuisse
 
		- Hanoi, Vietnam, The Vietnam Association of Geodesy, Cartography and 
		Remote Sensing (VGCR)
 
	 
	The decision will take place by blind votes following the FIG statutes 
	and internal rules. If there will be no absolute majority in the first round 
	of voting, a second vote will be organised between those two candidates that 
	have most votes.  
	Motion: This General Assembly decides the host and venue for FIG 
	2019 Working Week.  
	Decision:  
	29. REPORT ON THE FIG CONGRESS 2018 IN ISTANBUL, TURKEY
	
	Co-congress director Orhan Ercan from the Chamber of Surveying Cadastre 
	Engineers of Turkey will give a presentation on the preparations of FIG 
	Congress 2018.  
	Motion: That the General Assembly records the report  
	Decision:  
	30. REPORT ON THE FIG WORKING WEEK 2017 IN HELSINKI, 
	FINLAND 
	Representatives from the Local Organising Committee from the Finnish 
	Associations MIL and MAKLI will give a presentation on preparations of FIG 
	Working Week 2017.  
	Motion: That the General Assembly records the report.  
	Decision: 
	31. REPORT ON THE FIG WORKING WEEK 2016 IN 
	CHRISTCHURCH, NEW ZEALAND 
	Representatives from the Local Organising Committee from New Zealand 
	Institute of Surveyors will give a presentation on preparations of FIG 
	Working Week 2016.  
	Motion: That the General Assembly records the report.  
	Decision: 
	32. PRESENTATION OF CERTIFICATES OF APPRECIATION
	CLOSING CEREMONY
	 
	Data supplied by the FIG Office.   
	
	 
	 
	Whilst every effort has been made to ensure that this data 
	is accurate errors might exist. Requests for updates and corrections should 
	be emailed to the FIG Office. 
   |